Computed Tomography Scanner 2-in-1 Bondent 1030Pro Advanced

Bondent 1030Pro Advanced — 2-in-1 Dental CT for Comprehensive 3D Diagnostics

Bondent 1030Pro Advanced is a 3-in-1 dental computed tomography system that combines CBCT, Pano panoramic imaging, and Smart 3D Ceph. The system is suitable for endodontics, implantology, orthodontics, surgery, and TMJ diagnostics.

Key Features:

• detail resolution of up to 70 μm;
• local FOV of 5×5 cm;
• maximum FOV of 16×18 cm;
• It has 6 frame sizes (5x5, 8x5, 8x8, 12x8, 16x11, 16x18 cm);
• Pano panoramic imaging;
• Smart 3D Ceph without a separate cephalometric arm;
• reduced metal artifacts;
• AI and software tools for treatment planning.

CT for Endodontics — 70 μm and FOV 5×5 cm

For localized examinations, the Bondent 1030Pro Advanced provides detail resolution of up to 70 μm.

This allows clinicians to evaluate:

• complex root canal anatomy;
• MB2;
• periapical lesions;
• root fractures;
• the condition of surrounding bone tissue.

The optional Root Canal Visualization module helps visualize the root canal system.

For endodontists, this means high-resolution imaging of the specific area that is important for diagnosis and treatment planning.

CT for Implantology and Surgery

Bondent 1030Pro Advanced allows clinicians to assess bone tissue, identify the position of the mandibular canal, and plan implant positioning.

The software supports:

• digital implant planning;
• bone tissue assessment;
• automatic mandibular canal tracing;
• virtual crown;
• spatial analysis of implant position.

According to the manufacturer, automatic mandibular canal detection is performed in approximately 3 seconds with up to 98% accuracy.

The maximum FOV of 16×18 cm also allows the system to handle complex implantological and surgical cases.

FOV 16×18 cm for Comprehensive Diagnostics

The large scanning field allows clinicians to assess the following in a single examination:

• the upper and lower jaws;
• the complete dentition;
• the maxillary sinuses;
• the nasal cavity;
• both TMJs;
• the upper airways.

Therefore, one dental CT system can be used by multiple specialists within a multidisciplinary clinic.

TMJ CT in 2D and 3D

Bondent 1030Pro Advanced allows simultaneous assessment of the right and left temporomandibular joints.

The clinician can view the condyles and fossae in 2D and 3D within the same software environment.

This simplifies TMJ diagnostics, as well as orthodontic and functional planning.

Smart 3D Ceph for Orthodontics

Smart 3D Ceph generates cephalometric images through software, eliminating the need for a separate physical cephalometric arm.

The BonCeph software supports:

• 26 cephalometric measurement methods;
• profile analysis;
• facial analysis;
• bone age assessment;
• airway analysis;
• orthodontic report generation.

This makes the 1030Pro Advanced a comprehensive CT system for orthodontics and cephalometric diagnostics.

Fewer Metal Artifacts

AT Technology reduces the impact of artifacts caused by implants, metal crowns, and other structures.

This helps provide more informative 3D images for re-implantation, surgical planning, and examinations of patients with existing prosthetic structures.

Optional DP Technology additionally reduces noise and helps preserve the detail of bone tissue, roots, and nerve canals.

AI Functions of Bondent 1030Pro Advanced

Depending on the configuration, the following are available:

• automatic segmentation of jaws, teeth, and sinuses;
• Root Canal Visualization;
• AI Implant Planning;
• airway analysis;
• nerve canal segmentation;
• Superimposition for comparison of examinations before and after treatment;
• BonCeph;
• BonDiag.

Some AI functions are optional and depend on the CT system configuration.

What Applications Is Bondent 1030Pro Advanced Suitable For?

• Endodontics — MB2, complex canal anatomy, periapical lesions, root fractures.
• Implantology — pre-implantation CT, bone tissue assessment, mandibular canal evaluation, and implant planning.
• Orthodontics — Smart 3D Ceph, cephalometrics, profile and airway analysis.
• Surgery — impacted teeth, wisdom teeth, cysts, and assessment of anatomical structures.
• TMJ — bilateral 2D/3D joint diagnostics.

Why Choose Bondent 1030Pro Advanced?

• 70 μm — high detail resolution for endodontics.
• FOV up to 16×18 cm — large diagnostic areas.
• CBCT + Pano + Smart 3D Ceph — three diagnostic modalities in one system.
• AT Technology — fewer metal artifacts.
• AI functions — automation of analysis and treatment planning.

Bondent 1030Pro Advanced is a dental computed tomography system that can cover the key diagnostic needs of a multidisciplinary clinic with one system.

Buy Bondent 1030Pro Advanced Dental CT in Ukraine

At MDS, you can purchase the Bondent 1030Pro Advanced with configuration selection according to the clinic’s needs, installation, setup, staff training, and service support.

The price depends on the configuration and the set of software modules.

FAQ

1. What is the minimum voxel size of the Bondent 1030Pro Advanced?
   Up to 70 μm with a local FOV of 5×5 cm.
2. What is the maximum FOV?
   Up to 16×18 cm.
3. Is this CT suitable for endodontics?
   Yes. A 70 μm voxel allows detailed evaluation of root canals, MB2, periapical lesions, and fractures.
4. Is the Bondent 1030Pro Advanced suitable for implantology?
   Yes. The system supports bone tissue assessment, mandibular canal tracing, and digital implant planning.
5. Can it be used for TMJ CT?
   Yes. Bilateral TMJ analysis in 2D and 3D is available.
6. Is a separate cephalostat required?
   No. Smart 3D Ceph generates cephalometric images through software.
7. Are all AI functions included in the basic configuration?
   No. Some AI modules are available as optional features.

To order, contact the managers of the MDS company 
+38 (068) 337 37 37

For service or repair issues, contact the MDS service center
https://mg-dental.com.ua/service/