Compressor MDS 1200 with dryer 38L

The MDS 1200 compressor with a 38 L dryer is a powerful oil-free compressor with a low noise level, designed for clinics that require stable pressure, dry air, and predictable equipment performance without overpaying for a “brand”.

Who MDS 1200 is designed for

For a single-room clinic or offices with 1–2 units

A capacity of 200 L/min is sufficient for simultaneous operation of a dental unit plus additional instruments.

For clinics where low noise matters

Noise level — 65 dB.
This is a comfortable level for installation in a technical room or near the office.

For doctors working with adhesion

The built-in dryer provides dry air, which is critical for:

• sandblasters
• adhesive protocols
• prosthetic cementation
• microscope work

Key specifications

• Capacity (intake): 200 L/min
• Receiver volume: 38 L
• Number of motors: 1
• Number of cylinders per motor: 2
• Voltage: 220 V
• Maximum pressure: 8 bar
• Maximum receiver pressure: 15 bar
• Noise level: 65 dB
• Motor power: 1.2 kW
• Frequency: 50 Hz
• Rotation speed: 1400 rpm
• Type: oil-free
• Inner tank coating: lacquered + aluminum
• Dryer: yes

200 L/min — real stability

This means:

• no turbine pressure drop
• stable sandblaster operation
• uniform air supply during long procedures

38 L receiver — balance of size and air reserve

Does not take much space, but:

• provides reserve during peak loads
• reduces motor start frequency

2 cylinders on one motor

• more even load
• less vibration
• stable performance

Dryer

A key element for dentistry.
Moisture in the system means:

• reduced turbine lifespan
• adhesion issues
• risk of condensation in lines

Premium brands offer:

• longer history
• wide service network in the EU
• more expensive components

However, in key parameters for 1–2 units, MDS 1200:

• matches performance
• has a larger receiver
• comes with a dryer as standard

Advantages

• 200 L/min — sufficient for most clinical tasks
• 38 L receiver — good reserve
• Dryer included
• Oil-free technology
• Low noise 65 dB
• 220 V — standard power supply

Limitations

• Not for 3–4 units simultaneously
• Not for large surgical centers
• Not a premium brand with a 50-year history

Solutions for different specialties

For therapists

• stable turbine operation
• dry air for adhesion
• minimal noise

For prosthodontists

• dry air for sandblasting
• uniform air supply during cementation

For orthodontists

• stable pressure for enamel preparation

For surgeons

• stability during long procedures

When should you choose MDS 1200?

If you have 1–2 units
If low noise is important
If you need a dryer without extra cost
If you want a rational solution without overpaying for a brand

Frequently asked questions

1. Is 200 L/min enough for dentistry?
   Yes, for 1–2 units it is more than sufficient.
2. Is a dryer included?
   Yes, the compressor comes with a dryer.
3. Is it suitable for sandblasting?
   Yes, dry air ensures stable operation.
4. What is the noise level?
   65 dB — a comfortable level for a clinic.
5. Is a special power supply required?
   No, it operates on standard 220 V.

An optimal choice for therapists, prosthodontists, orthodontists, and surgeons looking for stable performance without overpaying for a premium brand.

To order, contact the managers of the MDS company 
+38 (068) 337 37 37

For service or repair issues, contact the MDS service center
https://mg-dental.com.ua/service/