Photopolymer lamp "Curing Pen"

• The head rotates 360 °
• 4 LEDs: 3 blue, 1 purple, 10 W LED
• Wavelength: 380-515 Nm
• Lens diameter: 11 mm
• The "smart" processor maintains the luminous flux density. Luminous flux intensity: 1000 mW / cm2, 1500 mW / cm2, 2300 mW / cm2, 600 mW / cm2 (caries detector mode).
• Width and depth of hardening: 10 mm
• High contrast digital display
• The display is adjustable for right or left hand operation
• Size: 24 X 21 X 230 (mm);
• Net weight: 109 g

6 LED programs: M0, M1, M2, RAMP, PULSE, Detect. M0, M1, M2 - standard modes in which it is possible to adjust the light intensity 2300 mW / cm2, 1500 mW / cm2, 1000 mW / cm2 and time. When these programs are switched on, the set light intensity is switched on immediately, and a beep sounds every 5 seconds.

"RAMP" mode - "soft start" mode. Light intensity 1000 mW / cm2. When you turn on this program, the light intensity gradually, during the first 5 seconds increases to 1000 mW / cm2, and then continues to emit 1000 mW / cm2 for a specified time . An audible signal sounds every 5 seconds.

"Pulse" mode - pulsating mode. When this mode is turned on, the light intensity is 1000 mW / cm2 and flashes once every 1 second for a specified time. An audible signal sounds every 5 seconds.

"Detect" mode - detection mode. Light intensity 600 mW / cm2. When switched on, the set light intensity is switched on immediately, and a beep sounds every 5 seconds. This mode is only suitable for detecting tartar, caries, cracks, etc. This mode cannot be used to cure composites, otherwise there is a risk of incomplete curing.

12 months warranty. Availability of service that provides post-warranty service.

Reviews from Instagram

https://drive.google.com/file/d/1Cu46npFZ4tHI90f1FgsIJQM_3eXnDIIv/